Max 300/350 bar 95° C 3/8” - 1/2” water TUBO 18 3/8” 10x18 mm TUBO 18 1/2” 12x20 mm
Max 15 bar 95°C acqua HOSE 43 1/2” 12,5x20,5 mm HOSE 43 3/4” 19x28 mm HOSE 43 1” 25x36 mm
Max 20 bar 100°C water Max 6 bar 165°C steam HOSE 45 1/2” 13x23 mm HOSE 45 3/4” 19x31 mm HOSE 45 1” 25x37 mm
Rubber coupling protection, fit on female coupler 4904 F and 4902 F.
Stainless steel rubber protected ball valve max 60 bar 95°C F+F 1/2”.
Complete Stainless steel foam nozzle with white protection, nozzle 50º 200 l/min at 20 bar.
Complete ST/ST rinsing/spraying nozzle with blue protection, nozzle 25°, 30 l/min at 20 bar.
Complete ST/ST rinsing/spraying nozzle with yellow protection, nozzle 25°, 60 l/min at 20 bar.
ST/ST nozze 1/2” 50° 200 l/min at 20 bar.
ST/ST nozze 1/4” 25° 30 l/min at 20 bar.
ST/ST nozze 1/4” 25° 60 l/min at 20 bar.
ST/ST ball valve with oval shaped lever 20 bar F+F 1/2”.
ST/ST ball valve with oval shaped lever 20 bar F+F 3/4”.
ST/ST AISI 316 swivel joint 1/2” F+M max 30 bar 90°C Viton sealing.
ST/ST AISI 316 swivel joint 1/2” F+M max 30 bar 90°C Silicon sealing, FDA approved.
ST/ST AISI 316 swivel joint 1/2”M - 3/4” F (bore 14 mm) max 30 bar 90°C Viton sealing.
Galvanized steel swivel joint 1/2” M+F Viton Sealing 90° C 300 bar.
Galvanized steel swivel joint 3/4” M+F Viton Sealing 90° C 300 bar.
Galvanized steel swivel joint 1” M+F Viton Sealing 90° C 300 bar.
Galvanized steel swivel joint 1” 1/4 M+F Viton Sealing 90° C 300 bar.
Galvanized steel swivel joint 1” 1/2 M+F Viton Sealing 90° C 300 bar.
Galvanized steel swivel joint 2” M+F Viton Sealing 90° C 250 bar.
ST/ST adaptor 1/2” F GAS BSP 1/2” F NPT.
Chromated brass quick release coupler female part max 10 bar 80°C M1/2”.
Chromated brass quick release coupler male part max 10 bar 80°C M1/2”.
Stainless steel AISI 316 quick release couplet max 200 bar 100°C F 1/2”.
ST/ST AISI 316 quick release coupler max 200 bar 100°C M 1/2”.
mated brass m 22x1.5 female fitting.
ST/ST m 22x1.5 female fitting.
ST/ST nipple 3/8” - 1/2”.
Galvanized nipple 3/8” - 1/2”.
ST/ST nipple M 22x1.5 - 1/2”.
ST/ST nipple 1/2”.
ST/ST AISI 316 nipple 1/2”.
Galvanized nipple 1/2”.
ST/ST nipple1”.
Galvanized nipple 1”.
Cromated brass reduction 3/4” M + 1/2” M.
ST/ST adaptor 1/2”.
ST/ST nipple 3/4”.
ST/ST AISI 316 nipple 3/4”.
Galvanized nipple 3/4”.
ST/ST nipple 3/4” - 1”.
ST/ST AISI 316 nipple 3/4” - 1”.
Galvanized nipple 3/4” - 1”.
Brass fitting 3/4”.
Brass fitting 1”.
Galvanized fitting 3/4”.
Galvanized fitting 1”.
Brass swivel joint 1/2” (bore 8 mm) max 20 bar.
ST/ST swivel joint 1/2” F+M max 200 bar 120°C.
ST/ST swivel joint 3/8” F+M max 350 bar 90°C.
ST/ST fitting 3/4”.
ST/ST fitting 1”.
Hand grip 3/8” hole 17 mm.
Hand grip 1/2” hole 20 mm.
Galvanized fitting 1/2”.
Galvanized fitting 3/8”.
ST/ST fitting 1/2”.
ST/ST fitting 3/8”.
Chromated brass fitting 1/2”.
Stainless steel bend M+F for AV 1100.
Stainless steel bend M+F for AV 3500.
1/2” hose bumper hole 20 mm.
1” hose bumper hole 34 mm.
3/4” hose bumper hole 26 mm
1/4” hose bumper hole 14 mm.
3/8” hose bumper hole 17 mm.
1/2” hose bumper hole 20 mm.
1/8” hose bumper hole 12 mm.
Hose bumper with 5 adapters : 11-13 mm, 14-16 mm, 17-19 mm, 19-21 mm, 22-24 mm.
Hose bumper 1” 1/4.
Hose bumper 1” 1/2.
ST/ST swivel joint 3/8”M -1/2”F in line, max 200 bar 90°C (on request up to 400 bar or 600 bar).
Stainless steel AISI 316 swivel joint 1” bore 19 mm max 80 bar 90°C Viton sealing.
Stainless steel AISI 316 swivel joint 1/2” bore 10 mm max 200 bar 90°C FFKM-PTFE sealing.
Stainless steel AISI 316 swivel joint 1/2” bore 10 mm max 400 bar 90°C FFKM-PTFE sealing.
Stainless steel AISI 316 swivel joint 1/2” bore 10 mm max 600 bar 90°C FFKM-PTFE sealing.
Galvanized steel swivel joint 1/2”, bore 10 mm max 200 bar 90°C EPDM sealing.
Stainless steel swivel joint 1/2”, bore 10 mm max 200 bar 90°C EPDM+Viton sealing.
Stainless steel swivel joint 1/2”, bore 10 mm max 400 bar 90°C FFKM+PTFE sealing.
Stainless steel swivel joint 1/2”, bore 10 mm max 600 bar 90°C PTFE+bronze sealing.
Stainless steel swivel joint ½”, bore 10 mm, max 200 bar 90°C. Inlet F ½”.
Stainless steel swivel joint 1/2”, bore 12 mm max 200 bar 90°C EPDM+Viton sealing.
Stainless steel swivel joint ½”, bore 12 mm, max 200 bar 90°C. Inlet F ½”.
Galvanized steel swivel joint ½”, max 600 bar (mineral oil/grease applications) polyurethane gasket.
Stainless steel AISI 316 swivel joint 1” with sealing for drinkable water, bore 24 mm.
Stainless steel swivel joint M22x1,5, bore 10 mm max 200 bar 90°C EPDM+Viton sealing.
Galvanized steel swivel joint 1”, bore 19 mm max 20 bar 90°C NBR sealing.
ST/ST swivel joint 1”, bore 19 mm max 20 bar 90°C Viton sealing.
ST/ST AISI 316 swivel joint 1/2” M+F Viton Sealing 90° C 250 bar.
ST/ST AISI 316 swivel joint 3/4” M+F Viton Sealing 90° C 250 bar.
ST/ST AISI 316 swivel joint 1” M+F Viton Sealing 90° C 250 bar.
ST/ST AISI 316 swivel joint 1” 1/4 M+F Viton Sealing 90° C 180 bar.
ST/ST AISI 316 swivel joint 1” 1/2 M+F Viton Sealing 90° C 150 bar.
ST/ST AISI 316 swivel joint 2” M+F Viton Sealing 90° C 150 bar.
Right brass swivel joint for oxygen 3/8’’.
Left brass swivel joint for gas 3/8’’.
Stainless steel toggle joint F+F 1/4” max 200 bar max 90°C. - water.
Stainless steel swivel joint 1” 1/4 max 50 bar 90°C with Viton TM and Teflon TM sealing, bore 26 mm.
Stainless steel swivel joint 1”1/2 max 50 bar 90°C with Viton TM and Teflon TM sealing, bore 33 mm.
Douche-head plastic gun in PA6.6 conformity Pistola per aria in alluminio. 90/128CEE 2002/72/CE and FDA 177.1500, max pressure 8 bar, max temperature 60°C, hose tail inlet 20 mm.
Max 40 bar 40°C water HOSE 61 3/8” 10x17 mm HOSE 61 1/2” 13x20 mm HOSE 61 3/4” 19x28 mm HOSE 61 1” 25x36 mm
Max 10 bar 80°C oil-diesel oil HOSE 62 3/4” 19x27 mm HOSE 62 1” 25x35 mm
Spraying nozzle (for 7050).
ST/ST filter (for 7050).
Foaming nozzle (for 7070).
High pressure nozzle 1/4”.
Sanificating high pressure nozzle 1/4”.
Foaming nozzle (for 7025 - 7012 sp).
Nozzles for hose unblocking.
Brass steam nozzle 1/4” F.
Steam gun, inlet outlet 1/4”F. Max 10 bar 180°C.
ST/ST single hose lance, 115 cm long, max 250 bar 160°C c/w nozzle inlet F 3/8”.
ST/ST gun, inlet swivel, max 65 bar 60 l/min 100°C. Inlet-outlet F+F 1/2”.
ST/ST water gun with inlet swivel 1/2”, max 125 bar 80 l/min 160°C. Inlet outlet 1/2” F.
ST/ST double hoses lance, 115 cm long, inox 250 bar 160°C c/w nozzle inlet F 3/8”.
Brass water gun with inlet swivel 1/2”, max 125 bar 80 l/min 160°C. Inlet outlet 1/2” F.
Chemical injector in ST/ST, max pressure up to 350 bar 90°C with metering tips. Inlet outlet 3/8” M.
Chemical injector in brass with ST/ST nozzle, low pressure 20 bar 50°C with by-pass and metering screw. Inlet outlet 3/8” F.
Chemical injector in ST/ST nozzle, pressure up to 200 bar 50°C with by-pass and metering screw. Inlet outlet 3/8” F.
PE Foam lance with brass tap 1/2”, without nozzle, max 20 bar 50°C, L=50 mm.
PE Foam lance with brass tap 3/4”, with nozzle 7007, max 20 bar.
High pressure lance with adjustable jet, inlet 3/8”, working pressure 200 bar, 100°C, 30 l/min, L=600 mm.
Spraying lance PVC pipe L=60 cm PVC nozzle. Inlet F 1/2”.
Spraying lance, ST/ST and Viton™ gun internal components, ST/ST lance and plastic nozzle F 1/2” inlet.
Foaming lance, ST/ST and Viton™ gun internal components, ST/ST lance and plastic nozzle F 1/2” inlet.
ST/ST telescopic pipe from 1 mt to 2 mt. ST/ST and Viton™ internal. F 1/2” inlet.
1/2” hose bumper hole 20 mm.
High pressure lance (or nozzle) stainless steel wall support.
High pressure lances (or nozzles) stainless steel wall support.
High pressure lances or nozzles stainless steel wall support.
Automatic hose reel stainless steel support for low pressure washing guns.
Low pressure water gun stainless steel support for manual hose reels. Available for AVM series 98XX and 99XX.
Heavy duty brass water gun, with djustable jet max 24 bar 95°C, inlet 1/2” F.
Heavy duty ST/ST AISI 316 water gun, with adjustable jet max 24 bar 60°C, inlet 1/2” F.
Light weight wash down guns, with adjustable jet max 12 bar 50°C, inlet 1/2” .F
Heavy duty ST/ST AISI 316 water gun, with adjustable jet max 24 bar 95°C, inlet 1/2” F.
Heavy duty brass water gun, with adjustable jet max 24 bar 90°C, inlet 1/2” F.
Heavy duty ST/ST AISI 316 water gun, max 24 bar 95°C, inlet 1/2” F, steril 160°C.
Heavy duty chrome plated brass water gun, with 1/2” male outlet max 24 bar 95°C, inlet 1/2” F.
Light weight wash down guns, with adjustable jet max 10 bar 50°C, inlet 1/2” F.
Light weight wash down guns, with adjustable jet max 10 bar 50°C, inlet 1/2” F.
ST/ST extention hose, inlet/outlet 1/4”.
Stainless steel lance with foam nozze (4805) and inlet 4904M L=50 cm.
Stainless steel lance with foam nozze (4805) and inlet 4904M L=20 cm.
ST/ST lance with blu handle complete with outlet 1/4” F and inlet 4904 M. 200 bar 40 l/min L=1 mt.
Wall rollers (bore 70x40 mm).
ST/ST side cover protection. For AV815/ 820/816/825/813/817/1000/1100/1200.
ST/ST side cover protection. For AV3500/ 3501/3502/3503/6000/6001/6300.
Base enlarger for ST 15 and ST 20 dim. 330x245, ST CP Conter plate for ST RP.
Base enlarger for ST 15 and ST 20. 330x245, ST CP Backplate for ST RP.
ST/ST swivel bracket. AV 1000 - AV 1500 - AV 815 - AV 820 - AV 816.
Powder coated steel swivel bracket. AV 1000 - AV 1500 - AV 815 - AV 820 - AV 816.
ST/ST swivel bracket. AV 1100 - AV 1200 - AV 2000 - AV 2200 - AV 2201 - AV825 - AV 813.
Powder coated steel swivel bracket. AV 1100 - AV 1200 - AV 2000 - AV 2200 - AV 2201 - AV 825 - AV 813.
Powder coated steel swivel bracket. AV 3000 - AV 3500 - AV 3501 - AV 3502.
ST/ST conter plate for base. AV 1100.
ST/ST conter plate for base. AV 3500.
Galvanized wringing machine with wall support.
Galvanized wringing machine with wall support and painted steel basin.
Galvanized wringing machine with stainless steel support and basin.
Galvanized wringing machine with powder coated steel support and basin.